Search Criteria
Products meeting the search criteria
PART NUMBER: 109103
109103 LS1/LS2 to LS3/LS9 MAP ADAPTER05-07 Corvette , 06 GTO or later 3 bar map adapter can be used on a Corvette supercharger application
..
$26.47
PART NUMBER: 109103-26
109103 LS1/LS2 to LS3/LS9 MAP ADAPTER 26"05-07 Corvette , 06 GTO or later 3 bar map adapter can be used on a Corvette supercharger application
..
$26.47
PART NUMBER: 108199
This adapter harness is for a 1992 Corvette ONLY. Any 1993-1997 LT1 optispark harness must be used with a 1992 Corvette, this adapter harness will make it plug and play. Also for use with 1992 Corvette when installing an MSD optispark (MSD does not provide the correct connector for the 1992 Corv..
$31.57
PART NUMBER: 102159
Hi-Lo Fan Controller - C6 Corvette, Z06, ZR1 Part Number 102159 For Model Years 2005 - 2013 Finally, a manual fan controller for the C6! New design Plug And Play module installs easily to the PWM-controlled coolant fan found on the C6 Corvette. The factory coolant fan is powe..
$100.88
PART NUMBER: 102158
102158 Exhaust Valve Bypass Switch – C6 Corvette Z06
This kit is designed to permit instant manual bypass of the two exhaust valve butterfly valves present in the Z06 muffler, giving the driver full control of maximum exhaust flow. The 102158 is a Plug-And-Play which includes only the switch and pl..
$48.91
PART NUMBER: 109089
CAM HARNESS 40inchesThis harness allows the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. This harness is perfect for LS2 motor conversions. Compatible with the PCM harness in LS1 Corvette and F-Body cars.- Ful..
$26.47
PART NUMBER: 109043
Corvette Euro Headlight Harness 9005/9006 to H4This kit is a plug-and-Play harness using sealed relays and OEM connections designed to drive AND brighten the headlight system for late model Corvette using the H4 EURO spec. headlamp housings. System attaches to the alternator stud or battery positive..
$126.43
-21 %
PART NUMBER: 102154
Corvette Hotwire 2003 C5 & C6This kit is designed to install into your late model Corvette and is designed to overcome the losses associated with factory wiring to the fuel pump. Because of the heavy 12 gage feed, sealed relay and attachment to the output stud of the alternator, extra voltage an..
$49.00 $62.30
-33 %
PART NUMBER: 102156
Corvette Hotwire Kit C5 - 1997 - 2002The Fuel Pump Hotwire Kit allows you to replace the stock, inadequate 18 gauge wire with a new 12 gauge feed using all OEM plug and play connectors! No wires to cut! This kit will increase the voltage at the fuel pump on average 2.5 volts. Make the most out of yo..
$49.00 $73.39
PART NUMBER: 109081
Knock/Cam Harrness LS1 tlo LS2/LS7 All in one!Cam HarnessThis harness allows the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. This harness is perfect for LS2 motor conversions. Compatible with the PCM harness ..
$56.05
PART NUMBER: 108165
MAF/IAT Breakout GT Series
This is the WIDE GT connector. This connector is found on the G8, Modular MAF Corvette (such as the C6 Z06) with the BLACK MAF connector.
..
$26.47
PART NUMBER: 109226
O2 Extension 24" C6 Corvette or 2010+Camaro
When installing aftermarket headers and cat-back systems in your
vehicle, the oxygen sensor is frequently relocated, usually far
enough away from the original wiring location that the connector
cant be re-installed. You cannot cut and spl..
$26.47
PART NUMBER: 109227
O2 Extension C6 Corvette 36"
When installing aftermarket headers and cat-back systems in your
vehicle, the oxygen sensor is frequently relocated, usually far
enough away from the original wiring location that the connector
cant be re-installed. You cannot cut and splice oxygen sensor
wiring s..
$26.47
PART NUMBER: 109225
12" O2 Sensor Extension, for C6 Corvette OR 2010+ Camaro When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You ca..
$26.47
PART NUMBER: 109066
RTD Simulator C4-C5 'VetteELIMINATED MIL LIGHT AND ASSOCIATED CODES WHEN REPLACING FACTORY SHOCK ABSORBERS Active suspension was a great idea for the Corvette. But, when replacing leaking factory dampening shocks, you got "shocked" when you discovered that the cost of ONE factory shock could enable ..
$179.47
PART NUMBER: 109096
RTD Simulator C6 'Vette
DOES NOT WORK ON 2003 & MOST 2004 CORVETTES!DOES NOT WORK ON 2013 CORVETTES!DOES NOT WORK ON ANY Grand Sport MODELS PLEASE CHECK YOUR CONNECTOR ENDS TO MAKE SURE THEY WILL MATCH UP!UPDATE!! (1/24/2023) There is a 50% chance these will not work on ANY..
$179.47
PART NUMBER: 410053
Caspers Exclusive!We’ve taken the connector that is molded into the tail light and parking light bulb and made a wire-to-wire connector from it! This product will allow the user to adapt, convert, and interface into the bulb connector while remaining sealed and weatherproof! The MPN listed below for..
$11.17
PART NUMBER: 102132
V-PLUS Volt Booster (82-93 F-Body/ Corvette)Your alternator is designed to put out a specific voltage to your electrical system, typically 13.2 volts. The car battery can then be continuously charged while the engine is running. The problem with this system is when there is a greater demand on the e..
$74.41
PART NUMBER: 115601
This is the connector that is used on the VDO - Siemens PWM Fan Controller - commonly found on Corvettes, BMW, and Audi applications. The kit will come with terminals and seals for all open cavities. This particular connector has CAVITY 7 BLOCKED.COMES WITH:1 CONNECTOR4 LARGE AND 4 SMALL..
$52.90
Showing 1 to 20 of 20 (1 Pages)