Menu
Your Cart

EVERYTHING ELSE


PART NUMBER: 108062
Hot Engine Switch Splice 1984 / 1989Plugs into the switch located in front of the intake, near the radiator hose inlet. Switch actuates the HOT light on dash. ..
$9.13
PART NUMBER: 108038
IAC Extender - 84/89Use this extension when you need to access IAC connector without removing turbo inlet pipe. Makes access to the connection easy. ..
$17.29
PART NUMBER: 108101
IAC MP to F-WP AdapterThis adapter converts your early GM wiring harness plug to the late model IAC found on later GM throttle bodies. 4-wire Plug-And-Play adapter is approx. 5 in. long...
$24.43
PART NUMBER: 108037
IAC Relocator - 84/89This wiring kit allows you to extend the terminals on an IAC motor, by plugging individual wires into the four connector terminals. Requires silocone sealant after terminals are inserted. Maximizes distance between the IAC connector and larger than stock turbo housing. Frequentl..
$13.21
PART NUMBER: 108093
IAC Splice - 84/89 Replacement for the IAC connector, frequently found with a broken latch. Located in front of the throttle body facing the turbo inlet pipe. For 86-89 turbo engines, color coded wires match OEM...
$9.13
PART NUMBER: 108137
Injector Con. Kit (Marine)This kit contains four injector connectors with seals and terminals. Used for replacement or modification to existing injector wiring...
$31.57
PART NUMBER: 108139
Injector Con. Kit LS7/LS2This kit contains four injector connectors with seals and terminals. Used for replacement or modification to existing injector wiring...
$31.57
PART NUMBER: 108138
Injector Connector Kit EV1This kit contains four injector connectors with seals and terminals. Used for replacement or modification to existing injector wiring...
$31.57
PART NUMBER: 108034
Injector Harness Car Side Pair - 84/85This pair of TWR connectors, both 3 and 4 cavity Weatherpack, found on engine harness, connects to the injector harness...
$26.47
PART NUMBER: 108010
Injector Harness Engine Side Splice - 1986 / 1989 A common failure due to heat drying out the plastic, making them brittle, these wiring connector replacements are exactly as original. This connector is used on the engine wiring end of 86-89 turbo cars, NOT the Injector harness end...
$24.43
PART NUMBER: 108011
Injector Harness Intake Side Splice - 1986 / 1989Female 7 cavity connector with male pins as used on the injector harness. This is the Intake End for 86-87 cars, part of the injector harness...
$24.43
PART NUMBER: 102001
Knock Gauge - rev3Black Face / Black TrimDetonation is your worst enemy and is the main cause of a blown head gasket, burned pistons or worse. Protect your engine with this unique knock display unit. Designed to fit into a standard 2-1/16 in. gauge opening or gauge pod, the three-color LED display g..
$140.00
PART NUMBER: 108055
Knock Sensor Splice - 84/89Found under coil module, single cavity oval connector, blue wire. Plugs into Knock sensor on engine block...
$9.13
PART NUMBER: 109081
Knock/Cam Harrness LS1 tlo LS2/LS7 All in one!Cam HarnessThis harness allows the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. This harness is perfect for LS2 motor conversions. Compatible with the PCM harness ..
$56.05
Late Model F-Body  - LS1 Fuel Pump Hotwire Kit - NOT FOR 1998 LS1
-46 %
PART NUMBER: 102150
Late Model F-Body - LS1 Fuel Pump Hotwire Kit 1999 AND ON - NOTE: Not for 1998 F-body or LS1 applications The Fuel Pump Hotwire Kit allows you to replace the stock, inadequate 18 gauge wire with a new 12 gauge feed using all OEM plug and play connectors! No wires to cut! This kit will increase..
$40.00 $74.41
PART NUMBER: 108002
Lo Speed Fan Relay Connector SpliceReplaces LOW speed fan relay connector, drivers side inner fender well. This connector has two red 12 gage wires on one terminal, one brown wire, one black/pink wire and a solid green wire...
$17.29
LS1 MAF to 3800 MAF Pigtail LS1 MAF to 3800 MAF Pigtail
-13 %
PART NUMBER: 108099
LS1 MAF to 3800 MAF PigtailOur 108099 Plug-in adapter is designed to adapt the current LS1 5-wire Mass Airflow Sensor to the GM 3800 Supercharged and NA engines, 1996-2002. Plug-in adapter has no provision for Airtemp Sensor, so only 3 of the 5 terminals on the LS1 MAF sensor are used.  ..
$22.95 $26.47
PART NUMBER: 109080
LS1 MAP Extension 26" This harness is used to extend the MAP sensor on any LS1 or LS2 based engine. Useful when installing aftermarket intake manifolds...
$34.63
Showing 141 to 160 of 265 (14 Pages)