Menu
Your Cart

EVERYTHING ELSE


PART NUMBER: 109013
FLAT O2 Extension - 18" GM When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since thi..
$26.47
PART NUMBER: 102038
Fuel Injector Dyno Harness 1986/1987 Also TTAUsed in dyno applications where the lengths of each connector are equal. Also can be used for sheet metal intake applications...
$105.01
PART NUMBER: 102037
Fuel Injector Harness 14 Gage - 86/87 Also TTAFactory appearing Fuel Injector harness using 14 gauge wire, recommended for use in high performance racing applications where low impedance injectors are used.    INSTALLATIONin PDF format..
$105.01
PART NUMBER: 108019
Fuel Pump Test Tap Mating Connector SpliceNot found on the factory harness, this connector mates with the fuel tap connector located behind the alternator. Typical application is to use a switch attached to this connector, and to the alternator stud. You can then manually run the fuel pump, to remov..
$9.13
PART NUMBER: 108018
Fuel Pump Test Tap Splice - 1984 / 1987This connector is found behind the alternator, single black connector with gray wire. Used to override ECM control of the fuel pump relay.NOTE: This connector should NOT be plugged into the nearby GREEN connector! ..
$9.13
PART NUMBER: 108131
Fuel Pump Trigger TapUsed on 1984-1987 turbo Regal – GN to extract the fuel pump feed from the factory connection. This tap will allow external fuel pump relay systems to function with the factory fuel pump relay. Used with our 102153 HD Fuel Pump Relay System which controls high current “Weldon” st..
$16.27
PART NUMBER: 102028
Fuel Pump Wiring Upgrade 1984/1987Absolutely essential upgrade item for your turbo car! Increases fuel pump volume by 15% or more! By far the finest 12 gage "hotwire" kit on the market, this "Plug-And-Play" system uses a weather-tight sealed 30 amp relay and sealed OEM factory connectors throughout...
$52.99
PART NUMBER: 102029
Fuel Pump Wiring Upgrade TTAAbsolutely essential upgrade item for your turbo car! Increases fuel pump volume by 15% or more! By far the finest 12 gage "hotwire" kit on the market, this "Plug-And-Play" system uses a weather-tight sealed 30 amp relay and sealed OEM factory connectors throughout. Inclu..
$68.29
PART NUMBER: 108033
Fuel Tank Connector Pair Splice - 84/87Replaces damaged connectors for fuel pump/sender. Kit contains two mating connectors with wiring. Connectors are supplied in BLACK color. 1984-1987 Turbo Regal..
$26.47
PART NUMBER: 108035
Fuel Tank Connector Pair Splice - TTAReplaces damaged connectors for fuel pump/sender. Kit contains two mating connectors with wiring. similar to our GN tank kit except the connector with the green seal has MALE terminals. Connectors are supplied in BLACK color. USED ON TURBO TRANS-AM ONLY!..
$26.47
PART NUMBER: 109038
  Fuel/Oil Logging Harness XFI KitThis Kit is designed to provide pressure logging data for fuel pressure and oil pressure by installing pressure transducers to the fuel and oil supply ports on the turbo Buick applications. This pressure data is then routed to the XFI ECU, through the Caspers ..
$185.30
PART NUMBER: 108090
Fuse Link Kit 4 Links Standard - TTALocation: Starter stud. Replace blown/broken/corroded fusible links with thisreplacement kit; 4 links go to 5-12 gage wires...
$23.41
PART NUMBER: 108088
Fuse Link Kit Standard 1984 / 19852-link kit for 1984-85 cars. The two links split between 3 12 gage wires identical to OEM part. Order our108091 HI PERF Fuse Link Kit if you want to put a SEPARATE link on each 12 gage wire - recommended for high performance use...
$20.35
PART NUMBER: 108077
Fuselink Connector Harness Mate - TTALocated on the engine harness, 89 TTA, connects to the positive battery cableand provided two 12 gage feeds. Frequently a victim of acid damage, thisassembly assures proper connection to the fuselinks. Mates with our 108076,found on the positive battery cable...
$9.13
PART NUMBER: 108160
MIC/P 56M MLD BLKThis bulkhead molded connector is the same style as used internally on the GM P3 ECM’s. Black in color, it has a total of 56 male pins between two separate connections. A and B are on the smaller 24 pin section, C and D on the larger 32 pin section. Connector is compatible with our..
$65.70
Showing 101 to 120 of 265 (14 Pages)