Menu
Your Cart

Corvette C5 1997-2004

Corvette C5 1997-2004
PART NUMBER: 109235
24" BLK SQ High Temp When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this can ..
$27.49
PART NUMBER: 109019
IAT Extension 36" When installing aftermarket cold air intake in your vehicle, the inlet air temperature (air temp sensor / intake temp sensor) sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splic..
$26.47
PART NUMBER: 109047
A/F Pigtail - FlatUsed on OBD I and II applications using the four wire sensors. Allows aftermarket air-fuel gage to be added to your current front oxygen sensor signal, with complete plug-in capability. Signal wire exits the plug-in assembly and allows addition of wire to your gage...
$18.31
PART NUMBER: 109049
A/F Pigtail SquareAllows aftermarket air-fuel gage to be added to your current front oxygen sensor signal, with complete plug-in capability. Signal wire exits the plug-in assembly and allows addition of wire to your gage...
$18.31
PART NUMBER: 103032
Breather - LS1 & 3800 This is a chrome top Breather Assembly with heavy duty billet Aluminum base. Bayonet type lock attaches securely to the valve cover. Used on the LS1 GM engine and Supercharged 3800 Series II engine. Bayonet twist-lock mounts securely and seals with an O rin..
$46.00
PART NUMBER: 109089
CAM HARNESS 40inchesThis harness allows the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. This harness is perfect for LS2 motor conversions. Compatible with the PCM harness in LS1 Corvette and F-Body cars.- Ful..
$26.47
PART NUMBER: 109043
Corvette Euro Headlight Harness 9005/9006 to H4This kit is a plug-and-Play harness using sealed relays and OEM connections designed to drive AND brighten the headlight system for late model Corvette using the H4 EURO spec. headlamp housings. System attaches to the alternator stud or battery positive..
$126.43
Corvette Hotwire 2003 C5 & C6 Corvette Hotwire 2003 C5 & C6
-21 %
PART NUMBER: 102154
Corvette Hotwire 2003 C5 & C6This kit is designed to install into your late model Corvette and is designed to overcome the losses associated with factory wiring to the fuel pump. Because of the heavy 12 gage feed, sealed relay and attachment to the output stud of the alternator, extra voltage an..
$49.00 $62.30
Corvette Hotwire Kit C5 - 1997 - 2002 Corvette Hotwire Kit C5 - 1997 - 2002
-33 %
PART NUMBER: 102156
Corvette Hotwire Kit C5 - 1997 - 2002The Fuel Pump Hotwire Kit allows you to replace the stock, inadequate 18 gauge wire with a new 12 gauge feed using all OEM plug and play connectors! No wires to cut! This kit will increase the voltage at the fuel pump on average 2.5 volts. Make the most out of yo..
$49.00 $73.39
PART NUMBER: 109042
Euro Tail Light HarnessPlug-and-Play kit that provides correct lighting for the EUROPEAN taillight housings, available from GM. Comes complete with AMBER bulbs. OEM quality and performance.   <> INSTALLATIONin PDF format..
$84.61
PART NUMBER: 109013
FLAT O2 Extension - 18" GM When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since thi..
$26.47
PART NUMBER: 109081
Knock/Cam Harrness LS1 tlo LS2/LS7 All in one!Cam HarnessThis harness allows the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. This harness is perfect for LS2 motor conversions. Compatible with the PCM harness ..
$56.05
LS1 MAF to 3800 MAF Pigtail LS1 MAF to 3800 MAF Pigtail
-13 %
PART NUMBER: 108099
LS1 MAF to 3800 MAF PigtailOur 108099 Plug-in adapter is designed to adapt the current LS1 5-wire Mass Airflow Sensor to the GM 3800 Supercharged and NA engines, 1996-2002. Plug-in adapter has no provision for Airtemp Sensor, so only 3 of the 5 terminals on the LS1 MAF sensor are used.  ..
$22.95 $26.47
PART NUMBER: 108115
LS2 TO LS1 Throttle Body Adapter HarnessNOTE: THIS HARNESS IS DESIGNED TO WORK WITH TBs THAT ARE 2005 TO 2008 ONLY! CHECK THE YEAR THAT THE TB IS DESIGNED FOR!!With this harness, it will allow the use of a LS2 throttle body on an LS1 vehicle. This harness is comprised of OEM connectors, terminals, l..
$48.91
PART NUMBER: 108100
Mass Air/Air Temp. Adapters Plug-And-Play adapter converts the 3-wire LT1 engine harness connector to plug directly into the 5-wire LS1 MAF sensor. Incorporates the AirTemp connector into the adapter to connect directly to the gray AirTemp sensor connector from the engine harness. ..
$31.57
PART NUMBER: 109010
O2 Sensor Extension FLAT 12" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since t..
$26.47
PART NUMBER: 109011
O2 Sensor Extension FLAT 24" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since t..
$26.47
PART NUMBER: 109012
O2 Sensor Extension FLAT 36" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since th..
$26.47
PART NUMBER: 109006
O2 Sensor Extension SQR 12" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since th..
$26.47
Showing 1 to 20 of 25 (2 Pages)