Menu
Your Cart

EVERYTHING ELSE


PART NUMBER: 108115
LS2 TO LS1 Throttle Body Adapter HarnessNOTE: THIS HARNESS IS DESIGNED TO WORK WITH TBs THAT ARE 2005 TO 2008 ONLY! CHECK THE YEAR THAT THE TB IS DESIGNED FOR!!With this harness, it will allow the use of a LS2 throttle body on an LS1 vehicle. This harness is comprised of OEM connectors, terminals, l..
$48.91
PART NUMBER: 109181
109181  This IAT Break out is for a GM 8 wire MAF. Works with: C7 GM trucks..
$56.05
PART NUMBER: 108125
MAF Adapter 3 pin w/ IAT to GTDesigned to facilitate the installation of a 5 wire WIDE pin spaced MAF (IE: 2006+ Z06) in a 3 wire MAF car (ie: 98 Camaro LS1).  Break out is 6" long. Use with our IAT extensions (part numbers 109017 - 12", 109018 - 24" or 109019 - 36") for easy installation...
$26.47
PART NUMBER: 108124
MAF Adapter Hi-Density Small 5 pin to GT    INSTALLATIONin PDF format..
$26.47
PART NUMBER: 109022
MAF Extension 12" Relocating or installing upgrade or accessory devices, such as Airfuel Ratio gauges, throttle bodies, mass airflow sensors, MAP sensors and air temperature sensors require extended or accessory tap wiring. Because it is not practical or safe to cut wiring to these devices, using t..
$26.47
PART NUMBER: 109023
MAF Extension 24" Relocating or installing upgrade or accessory devices, such as Airfuel Ratio gauges, throttle bodies, mass airflow sensors, MAP sensors and air temperature sensors require extended or accessory tap wiring. Because it is not practical or safe to cut wiring to these devices, using t..
$26.47
PART NUMBER: 109024
MAF Extension 36" Relocating or installing upgrade or accessory devices, such as Airfuel Ratio gauges, throttle bodies, mass airflow sensors, MAP sensors and air temperature sensors require extended or accessory tap wiring. Because it is not practical or safe to cut wiring to these devices, using t..
$26.47
PART NUMBER: 108136
MAF/IAT Breakout - GT Series DenseTypically found on the 05/06 Pontiac GTO, C5 Allows the use of an external, relocated IAT sensor. Uses OEM and custom made connectors for a sealed plug-and-play and OEM fit and finish. Please look at the connectors pictured closely and verify against what is on your..
$26.47
PART NUMBER: 108165
MAF/IAT Breakout GT Series   This is the WIDE GT connector.  This connector is found on the G8, Modular MAF Corvette  (such as the  C6 Z06) with the BLACK MAF connector.    ..
$26.47
PART NUMBER: 108046
MAP Sensor Splice - 84/89Plug-in splice end for GM style MAP sensors. Green: Signal, Black: Ground, Gray: Pos 5vdc. Used for adding a MAP sensor or connector repair...
$9.13
PART NUMBER: 108100
Mass Air/Air Temp. Adapters Plug-And-Play adapter converts the 3-wire LT1 engine harness connector to plug directly into the 5-wire LS1 MAF sensor. Incorporates the AirTemp connector into the adapter to connect directly to the gray AirTemp sensor connector from the engine harness. ..
$31.57
PART NUMBER: 108030
Mass Airflow Mating Splice SpecialThis connector is equivalent to the MASS AIRFLOW (MAF) end of the connection. It mates with the plug on your wiring harness that plugs into the MAF sensor, and is used for diagnostic purposes. Not a part of the original engine wire harness. Can mate to MAF harness c..
$17.29
PART NUMBER: 108029
Mass Airflow Splice Harness side - 84/89Replace damaged or corroded MAF connector. Also, with extra length, add some slack to the already stretched plug, eliminating future potential connection problems...
$9.13
PART NUMBER: 102050
Negative Battery Cable - TTAEliminate electrical "gremlins" with a new cable. Our negative cable is manufactured to OEM specifications, using the new "slip-over" terminal cover design. Secondary ground pigtail wire included...
$42.79
PART NUMBER: 109226
O2 Extension  24"  C6 Corvette or 2010+Camaro When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and spl..
$26.47
Showing 161 to 180 of 265 (14 Pages)