PART NUMBER: 102087
CCCI HOTWIRE 86/89Designed to interface with your 86-89 CCCI ignition system, this specially made harness provides increased voltage and current to the ignition coils. Attaches to your battery positive junction or alternator stud, and provides as much as 20% more power to the ignitio..
$125.00
PART NUMBER: 102060
CCCI Ignition Harness 1986/1987This harness is designed to power up the CCCI ignition system components for use on other applications or race applications using a DFI or SpeedPro (FAST) ECU. Provides connections to the CCCI Ignition Module (Part No. 107125 and 107128), CAM sensor (Part No. 107102) a..
$79.51
PART NUMBER: 108013
CCCI Splice - 1984 / 1985
Repair damaged or corroded C3I
module connector This splice end is used on 1984-1985
ONLY.*FOR THE WIRING DIAGRAM CLICK LINK BELOW:http://www.installationinstructions.com/108015.pdf..
$31.57
PART NUMBER: 108014
CCCI Splice - 1986 / 1989Repair damaged or corroded C3I module connector This splice end is used on 1986-1989 ONLY.*FOR THE WIRING DIAGRAM CLICK LINK BELOW:http://www.installationinstructions.com/108015.pdf..
$31.57
PART NUMBER: 108015
CCCI Splice with Crank and Cam Plugs - 1984 / 1985Repair damaged or corroded C3I module connector This splice end is used on 1984-1985 ONLY. Includes both crank and cam connectors...
$69.95
PART NUMBER: 108016
CCCI Splice with Crank and Cam Plugs - SPECIALUse this special splice assembly when repairing your 1984-1985 engine harness when you intend to use a 1987 style module. Wiring pinout is setup for the 87 style module and DOES NOT require the plug-in adapter. NOTE: CCCI Mounting Plate is required to fa..
$69.95
PART NUMBER: 102085
Coil Base Adapter PlateUse this plate to adapt the newer 87-style CCCI module to the early 84/85 turbo engine bracket. Fits on our 107125 CCCI Module (87). Use our 102086, 102084 CCCI Adapter below to complete installation...
$52.00
CASPER'S EXCLUSIVE
PART NUMBER: 109029
Complete 84/85 Engine Wiring HarnessThis harness is usually in stock, however, please keep in mind that it may take up to 2 weeks for us to produce this harness. THIS HARNESS IS NON-RETURNABLE!!!!!!!OEM replacement harness fits 84-85 Turbo Regal and Riviera. Uses OEM factory connectors, wire an..
$1,250.00
CASPER'S EXCLUSIVE
PART NUMBER: 109030
This harness is usually in stock, however, please keep in mind that it may take up to 2 weeks for us to produce this harness. THIS HARNESS IS NON-RETURNABLE!!!!!!!Complete 86/87 Engine Wiring HarnessThis engine harness is OEM design with improvements made to certain "too-short" connectors and i..
$1,250.00
PART NUMBER: 108128
Connector Kit, GM ECM Gen 6 Connector kit with terminals provides the proper connection to early GM ECUs using the 24 and 36 cavity unsealed black connectors, and also the early DFI ECU (GEN 6)...
$48.57
PART NUMBER: 108129
Connector Kit, XFI, AEM ECU Connector kit includes four different connectors with associated pins. On these connectors, there are two distinctly different sizes which can be seen on the terminal cavities. Two different size terminals are included in this kit. Shipped with the terminal locks pre-load..
$42.79
PART NUMBER: 108032
Coolant Fan Harness - 86/87Located on cooling fan assembly. Includes the three wires with ring terminals, connects to fan motor and low speed resistor...
$17.07
PART NUMBER: 108031
Coolant Fan Splice Engine Side - 86/87Replaces broken/damaged harness end cooling fan connector. This connector has three female terminals and 12 gage wires...
$17.29
PART NUMBER: 108052
Coolant Temp Sensor Splice - 1986/ 1987Frequently damaged due to its location and fragile design, it is a critical connection because of the resistance type temperature sensor it plugs into. Utilizes the correct black/yellow wires. Commonly used on ྒ-༾ GM cars...
$9.13
PART NUMBER: 109043
Corvette Euro Headlight Harness 9005/9006 to H4This kit is a plug-and-Play harness using sealed relays and OEM connections designed to drive AND brighten the headlight system for late model Corvette using the H4 EURO spec. headlamp housings. System attaches to the alternator stud or battery positive..
$126.43
-21 %
PART NUMBER: 102154
Corvette Hotwire 2003 C5 & C6This kit is designed to install into your late model Corvette and is designed to overcome the losses associated with factory wiring to the fuel pump. Because of the heavy 12 gage feed, sealed relay and attachment to the output stud of the alternator, extra voltage an..
$49.00 $62.30
-33 %
PART NUMBER: 102156
Corvette Hotwire Kit C5 - 1997 - 2002The Fuel Pump Hotwire Kit allows you to replace the stock, inadequate 18 gauge wire with a new 12 gauge feed using all OEM plug and play connectors! No wires to cut! This kit will increase the voltage at the fuel pump on average 2.5 volts. Make the most out of yo..
$49.00 $73.39
PART NUMBER: 108022
Crank Sensor Splice Engine Harness Side - 1986 / 1989Common problem is loss of contact tension on terminals, causing intermittent ignition related codes or stalling. Located at bottom drivers side of engine at CRANK sensor...susceptable to road grime and water damage. Replace damaged or corroded cra..
$9.13
PART NUMBER: 108024
Crank Sensor Splice Engine Side - 1984 / 1985..
$9.13
PART NUMBER: 108023
Crank Sensor Splice Sensor Side - 1984 / 1985..
$9.13