Search Criteria
Products meeting the search criteria
PART NUMBER: 109148
This Relay system is designed to control MAXIMUM high current loads. Great for high horsepower fuel pumps, oversized cooling fans, as well as accommodate control of entire vehicle eletrical systems. The rel..
$100.93
PART NUMBER: 109156
Universal MAXX-Relay Connector Kit
Includes:
70 Amp Relay, Relay Connector, Terminals and Seals
(can be used with 10 - 16 Gauged wire)..
$35.65
PART NUMBER: 109157
Universal sealed MAXX-Relay Holder Pigtail
KIT: Pre-Crimped colored wire 24" in length
sealed relay holder & 70 Amp relay
also includes butt splices and heat shrink ..
$50.95
-46 %
PART NUMBER: 108130
40 AMP Replacement Relaymanufacturer may vary...
$11.50 $21.37
PART NUMBER: 107120
Blower Fan RelayFound on blower housing under hood, passenger side. Replace when fan controldoes not actuate heater/blower fan...
$26.47
PART NUMBER: 108050
C437 Mating Pair - 84/87Located under throttle linkage, on top of lower intake. Attaches to hi temp switch, green wire with yellow stripe, controls hi speed relay and delay relay. ..
$31.57
PART NUMBER: 102087
CCCI HOTWIRE 86/89Designed to interface with your 86-89 CCCI ignition system, this specially made harness provides increased voltage and current to the ignition coils. Attaches to your battery positive junction or alternator stud, and provides as much as 20% more power to the ignitio..
$125.00
-21 %
PART NUMBER: 102154
Corvette Hotwire 2003 C5 & C6This kit is designed to install into your late model Corvette and is designed to overcome the losses associated with factory wiring to the fuel pump. Because of the heavy 12 gage feed, sealed relay and attachment to the output stud of the alternator, extra voltage an..
$49.00 $62.30
PART NUMBER: 109069
Dual Fan Relay HarnessUse this relay harness when installing a Dodge Intrepid dual fan assembly. This takes the excessive electrical load off of the factory wiring and places it upon two separate sealed relays.NO CONNECTORS TO ADD. This harness is Plug-And-Play design for the 86-87 Buick Grand Natio..
$68.29
PART NUMBER: 108001
Fan Delay Relay C1 Connector SpliceLocated on inner fender well, drivers side, on LARGE relay (Delay Relay), connector C2. This is one of two connectors on the relay, heavy current load connection...
$9.13
PART NUMBER: 108004
Fan Delay Relay C2 Connector SpliceLocated on inner fender well, drivers side, on LARGE relay (Delay Relay), connector C1. This is one of two connectors on the relay. Unsealed connector usually shows signs of corrosion and heat damage...
$9.13
PART NUMBER: 102066
Fan Relay Installation Kit 84/85THIS KIT CAN ONLY BE USED IF YOU UPGRADE YOUR ECM TO THE 86-87 UNIT! Allows use of an electric fan on early hot air cars which originally used the mechanical belt-driven fan. When using an 87 style ECM, fan control can be programmed in the PROM chip...
$74.41
PART NUMBER: 108131
Fuel Pump Trigger TapUsed on 1984-1987 turbo Regal – GN to extract the fuel pump feed from the factory connection. This tap will allow external fuel pump relay systems to function with the factory fuel pump relay. Used with our 102153 HD Fuel Pump Relay System which controls high current “Weldon” st..
$16.27
PART NUMBER: 102028
Fuel Pump Wiring Upgrade 1984/1987Absolutely essential upgrade item for your turbo car! Increases fuel pump volume by 15% or more! By far the finest 12 gage "hotwire" kit on the market, this "Plug-And-Play" system uses a weather-tight sealed 30 amp relay and sealed OEM factory connectors throughout...
$52.99
PART NUMBER: 102029
Fuel Pump Wiring Upgrade TTAAbsolutely essential upgrade item for your turbo car! Increases fuel pump volume by 15% or more! By far the finest 12 gage "hotwire" kit on the market, this "Plug-And-Play" system uses a weather-tight sealed 30 amp relay and sealed OEM factory connectors throughout. Inclu..
$68.29
PART NUMBER: 102153
H/D Hotwire UniversalStand-alone fuel pump relay system uses a sealed 70 amp heavy-duty relay. System is designed to tie directly into the battery lugs, and is furnished with a 50 amp sealed fuse holder and 10 gage wiring. Can be used stand-alone with an external toggle switch to energize the relay,..
$105.00
PART NUMBER: 108123
HD Fuel Pump/ Fan Relay KitThis kit is designed for high current applications such as high power coolant fans, high flow fuel pumps and any other load switching which requires an SPDT 40 amp relay. Sealed relay is packaged with sealed connector, three 12/10 gage Pull To Seat terminals for the rela..
$24.43
PART NUMBER: 108003
Hi Speed Fan Relay Connector SpliceReplaces HI speed fan relay connector, drivers side inner fender well. Unsealed connector has one 12 gage red wire...
$17.29
PART NUMBER: 108002
Lo Speed Fan Relay Connector SpliceReplaces LOW speed fan relay connector, drivers side inner fender well. This connector has two red 12 gage wires on one terminal, one brown wire, one black/pink wire and a solid green wire...
$17.29
PART NUMBER: 108044
Power Master 4 Cavity Splice 1986 / 1987This splice replaces the 4 cavity PowerMaster connector found on the relay (lower) connection at the pump motor...
$9.13